Samsung SCX-6545N - Chapter 7 Reference Information; Parts Life Cycle Maintenance Table

Reference Information
Service Manual
7-1
Samsung Electronics
7. Reference Information
Please refer to description in this manual for details.
7.1 Parts Life Cycle Maintenance Table
7.1.1 Parts Life Cycle Maintenance Table
Supplies Life-Cycle Condition Engine-
Codition
LCD- Indication Custmoer -
Panel Manage
Toner
Toner
Cartridge
200K: For Product
100K: For Sale
Toner Low Warning Ready Low Toner - - 10% Remains
Toner Empty Warning Ready Toner -
Initialized at
toner change
Fuser
100K(page):
Simplex
Fuser 90% Warning
Replace Fuser
Soon
-
Fuser 100% Warning Replace Fuser Engine Stop
Transer
Roller
100K(page):
Simplex
Exhauseted No Indication No Indication
Replaced at
Exhauseted
PickUP
Roller
Simplex:
Black 60K(page)
Color 15K(page)
Exhauseted No Indication No Indication
Replaced at
Exhauseted
7.1.2 Toner Cartridge Criterion
1) Supplies Criterion (Toner Cartridge)
1. Cartridge Main Defects
- White Point, Black Point : White or Black point on printing image
- Image contamination : Dirty printing image
- Image Fainted : Entire Image is fainted and vertical white line emerge
- Black Line : Vertical black line emerge on printing image
2) Defect Symptoms
Symptoms Criterion Remarks
White, Black Point
Clean Up OPC (10 times), if disappeared, no failure.
- If continuous, failure
Image contamination
(Toner leakage)
Drity printing image or conteminated reverse side
- Clean up OPC (10 times) and inside of machine with cloth, if
disappeared, no failure.
Image Fainted
After shake cartridge right and left 5~6 times, if printing image
is not fainted, no failure. (Toner Exhausted)
Vertical Black Line
Vertical thin line emerge, if cartridge is scratched.
- (Customer fault)