Error RF_ID
[Description] Drum Cartridge and Toner Container can’t be detected
[Wrong Part] 1. RF_ID Coupler and Tag
2. Main PBA
[Check and Cause] 1.Check RF_ID Tag attached on Drum and Toner
2.Check the DEVE Harness and RF_ID coupler
3.Check Main PBA
[Solution] 1.Replace Drum cartridge and Toner container
2.Replace DEVE Harness and RF_ID coupler.
3.Replace Main PBA
Error Smart Panel not support
[Description] Smart Panel only supports USB and Network port.
[Check and Cause]
• If le is printer port, smart panel show below warning message when user try to
launch smart panel. Also printer name is not displayed in the menu of tray icon.
[Solution] If IP address or USB port name for model A is linked to printer port of model B,
Smart Panel for model B works improperly because model B is not connected.
To Next Page
Loading...
