Samsung SCX-6545N - Page 65

Finisher
Service Manual
2-53
Samsung Electronics
2.3.4.3 Electric static charge amount from Engine
: ≤0.5 kV per sheet
(Simplex / Duplex)
- Registration and skew from Engine
: A ≤3.0 mm
- Standard test pattern of printing : Samsung’s Printing Pattern
2.3.4.4 Stapling
2.3.4.4(a) Printing orientation
(This nisher can’t staple on a suitable position if printing direction is not as follows.)
2.3.4.4(b) Position of stapling