Basictrosbbshoeting
Learn to solve cornmon problems by setting shooting options,
Tile subiect s eyes
appear red
Photos are bhrred
Red eye occurs when the subject's eyes retlect lightfrom the camera flash.
• Set the flash option to _ Red-eye or___ Red-eye Fix. (p, 64)
• Ifthe photo has already been captured, select ,_ Red-eye Fix in the edit menu, (p, 97)
If dust particles are present in the air,you maycapture them in photos when you use the flash,
• Turnoff the flash or avoid capturing photos in a dusty place,
• Set ISO sensitivity options. (p. 66)
Blurring can occur if you capture photos in low light conditions or hold the camera incorrectly,
Use the OISfunction or hafl press [Shutter] to ensure the subject isfocused, (p, 35)
Photos are blurred
when shoo@/g at
night
Subiecte come out
too dark because of
bacHighting
As the camera triesto let in more light, the shutter speed slows. This can make it difficultto hold the
camera steady long enough to capture a clear photo and may result in camera shake,
• Select Night Shot mode, (p, 51)
• Turnon the flash. (p. 64)
• Set ISO sensitivity options, (p, 66)
• Use a tripod to preventyour camerafrom shaking,
When the light source is behind the subject or when there is a high contrast between lightand dark
areas, the subject may appear too dark,
• Avoid shooting toward the sun.
• Select Backlight in Scene mode. (p. 42)
• Set the flash option to _F Fill in. (p, 64)
• Adjust the exposure. (p, 74)
• Set the Auto Contrast Balance (ACB) option, (p. 75)
• Set the metering option to [] Spot ifa subject is in the center d the frame, (p, 75)
To Next Page
Loading...
