Chargingthe baSer7andturningon 70urcamera
Charging the batte_%_
Before you use the camera for the first time, you must charge the
battery, Plug the small end of the USB cable into your camera,
and then plug the other end of the US8 cable into the AC}
adapter.
Statuslamp
• Red light on: Charging
• Red light off: Fullycharged
• Red light blinking: Error
Turning on your camera
Press [POWER] to turn your camera on or off.
• The initial setup screen appears when you turn on the camera
for the first time. (p. 19)
}:1
Press [[]], The camera turns on and irnrnediatel, accesses
Playback mode.
chargeorwork properly.
Basicfunctions 18
To Next Page
Loading...
