10
· English
Registering a station hub
Power connection
Plug-in the product power adapter to the wall outlet and connect the product as
shown.
n
` Make sure to use the provided power adaptor. If you use an adaptor other than the
power supply adaptor provided in our package, the product may not operate properly.
` It takes about 30 seconds to reboot the product completely.
` When the product is turned on, the LED blinks red.
❖
LED status
LED indicator shows operational status with colors.
Refer to table below for detailed meaning of the LED indicator.
Color Status
Red Booting up
Red Blinking Booting completed / Establishing network connection
Yellow Enabling Wi-Fi Direct
Blue Blinking Connecting to the network.
Blue Local connection established
Green Connection to server completed / Normal operation
Purple Updating firmware
Network connection
In a location with a strong Wi-Fi signal and no interference, use Wi-Fi
communication.
In a location with a weak Wi-Fi signal and heavy interference, use Ethernet
communication.
POWER
NETWORK
Wi-Fi
PAIR
POWER
NETWORK
Wi-Fi
PAIR
Wi-Fi
To Next Page
Loading...
