Installation 9
Precautions 9
Registering a station hub 10
Power connection on camera 11
Camera Registration 12
Camera Installation 12
Replace battery 14
Network Connection and Settings 15
Precautions 15
Connecting via LAN cable 15
Connection using the Wi-Fi Direct function 16
02
Precautions
1. As this product works on a Wi-Fi network, video receiving may be unstable if
there is an obstacle (metal, wall, door) in the use environment, or if the
product is receiving interference from another Wi-Fi device nearby.
Install the station hub and the camera at a position that ensures good video
reception, considering the Wi-Fi network environment.
2. Do not install the device under direct sunlight or other strong light sources.
Place it where there is good visibility.
3. Do not install it in a place where there are a lot of obstacles.
4. When wiping the surface of the product, a clean and soft dry cloth should be
used. Moist the dry cloth with water and wring it thoroughly to remove extra
water.
(Do not use cleaners containing alcohol or solvents, detergents containing
surface active ingredients, and skin care products or oil, as they can cause
damage or deformation of the product.)
5. Do not install the product in places where there are or may be chemicals or
traces of oil. Cooking oils like soybean oil can cause damage or deformation
of the product, so please do not install the product near the kitchen or the
kitchen counter. This may cause damage to the product.
6. Please be careful not to get chemical substances on the surface of the
product when installing the product.
Some detergents or chemical solvents like adhesives can cause serious
damage to the surface of the product.
7. The function and performance of the product may not be guaranteed if the
product is not installed/uninstalled by the recommended procedure.
Installation
To Next Page
Loading...
