Creating an Account and Registering a Station Hub
With the Wisenet SmartCam+ app, users can monitor the SmartCam camera
from a mobile device.
1. Go to Google Play/App Store and search for “Wisenet SmartCam+”.
2. Download the application and install it on your mobile device.
3. Run the downloaded application.
4. After completing member registration, register the station hub as instructed
on the screen.
n
` For more details, refer to Wisenet SmartCam+ mobile guide.
Power connection on camera
Station camera
Turn on the power switch at the bottom of the camera.
J
` The power may not turn on if the battery is low.
In this case, dock it on the station hub to recharge and try
again.
Outdoor, Battery-Powered Camera
1. As shown in the figure, push the switch with your left
hand and push the cover with your right hand.
2. Insert the batteries.
J
` Insert the batteries with correct electrode after
checking the electrode.
3. Close the battery cover.
<iOS>
<Android>
OFF ON
PAIR
a
b
To Next Page
Loading...
