installation & connection
14_ installation & connection
CONNECTING WITH OTHER DEVICE
Connecting to the monitor
Use the test monitor cable to connect the video output port of the camera with the video
input port of the monitor.
In the initial installation of the camera, you can connect the camera to the monitor for checking
the connection status.
You must set <Video output> to <On> before the display screen can be activated. (page 36)
The BNC Out terminal of the product is provided for easier installation, and is not recommended
for monitoring purposes.
If you keep the BNC cable connected, a risk of lightening may cause damage or malfunction to
the product.
M
J
Power
Ethernet
To Next Page
Loading...
