setup screen
50_ setup screen
Video analysis
From the Setup menu, select the
<Event ( )> tab.
Click <
Video analysis>.
To set the Motion Detection
Select a motion detection mode.
Specify the use of motion detection.
Select a sensitivity level of the motion
detection.
Place the cursor at a point in the video
and drag it to whatever you need.
You can specify up to 4 motion detection
areas.
Specify the activation time and
activation condition.
For more information about <Activation
time> and <Action>, refer to “Alarm input”.
(page
49)
When done, click [Apply (
)].
1.
2.
1.
2.
3.
4.
5.
6.
To Next Page
Loading...
