Samsung SNO-5080R - Alarm Input

English _49
● SETUP SCREEN
Sender : Enter the address of the email sender. If the sender address is
incorrect, the email from the sender may be classified as SPAM by the email
server and thus may not be sent.
Subject : Enter a subject for your email.
Body : Provide the text for the massage. Attach the alarm images to the email
that you are preparing.
When done, click [Apply (
)].
Alarm input
You can set the alarm input type, activation time, and operation mode.
From the Setup menu, select the
<Event (
)> tab.
Click <Alarm input>.
Specify an input device.
Type
Normal Open : It is normally open,
but if it is closed, an alarm will be
triggered.
Normal Close : It is normally
closed, but if it is open, an alarm
will be triggered.
Specify the <Activation time>.
Always : Always check if an alarm occurs. It activates in operated mode when the
alarm occurs.
If set to Always, the activation time cannot be changed.
Only scheduled time : Check if an alarm occurs at a specified day of the week for
a specified time period. It activates in operated mode when the alarm occurs.
[
] : Reset all settings.
Specify an operation that will perform if an alarm occurs.
Alarm output : Select whether to set the alarm output if an alarm is incoming, and
specify the alarm output time.
E-mail sending : Specify the use of email transfer in the alarm input setup.
When done, click [Apply ( )].
-
-
-
4.
1.
2.
3.
•
-
-
4.
•

•
•
5.
•
•
6.