setup screen
36_ setup screen
Video setup
From the Setup menu, select the
<Video ( )> tab.
Click <Video setup>.
Select a <Video source> mode.
Flip mode : Turn upside down
the image that is captured by the
camera.
Mirror mode : Flip horizontal the
image that is captured by the
camera.
Set the <Privacy area configuration>.
You can set up to 12 privacy zones.
Set the <Video output>.
If you select <Off>, the video signal will not be output via the VIDEO OUT port.
When done, click [Apply ( )].
To set the privacy zone
You can specify a certain area of the camera video to be protected for your privacy.
Set it to <On>.
Place the cursor at a point in the video
and drag it to whatever you need.
Specify the <Color> that will fill the
privacy area.
To cancel your selection, simply click
[Clear ( )].
When done, click [Apply (
)].
1.
2.
3.
•
•
4.
5.
-
6.
1.
2.
3.
4.
5.