Samsung SNO-5080R - Camera Setup

English _37
● SETUP SCREEN
Camera setup
You can change the camera settings according to the environment where the camera is
located.
From the Setup menu, select the
<
Video ( )> tab.
Click <Camera setup>.
Configure the settings as necessary
of : SSDR, White balance, Backlight,
Exposure, Special,
OSD, IR Mode
When done, click [Apply ( )].
SSDR (Samsung Super Dynamic Range) Setup
In a scene where the difference between bright and dark is severe, you can increase the
brightness of the dark area alone to regulate the overall brightness.
Select <SSDR>.
Set <Mode> to <On>.
Configure the <Level> and <D-Range>
settings as necessary.
Level : Adjust the level of the
dynamic range.
D-Range : Select the amplitude area of the dynamic range.
White balance Setup
You can correct the image colors based on white under any lighting conditions.
Select <White balance>.
Select <Mode>.
ATW : Corrects the colors of the
camera video automatically.
1.
2.
3.
4.
1.
2.
3.
•
•
1.
2.
•