Samsung SNO-5080R - Page 38

setup screen
38_ setup screen
Manual : You can adjust the red and blue gains of the camera video manually.
AWC : Corrects the colors of the camera video to be optimized to the current
lighting condition and screen mode.
You may need readjustment if the lighting condition is changed.
Outdoor : Automatically corrects the video colors of the camera to be optimized
to the outdoor environment.
Indoor : Automatically corrects the video colors of the camera to be optimized to
the indoor environment.
In AWC mode, click the [AWC Set] button if you want to keep the white balance level of the
current image.
BLC Setup
You can specify a desired area on the video manually and set the area to be displayed
more clearly.
Select <Backlight>.
Set <Mode> to <BLC>.
Set <BLC level>.
You can change the level to adjust the
brightness of the monitoring area.
Set the <Top
, Bottom, Left, Right>
levels to specify the target area.
HLC (Highlight Compensation) Setup
When a strong light such as streetlamp or headlight faces forward to the camera, you can
mask that exposed area in order to protect it from being saturated.
Select <Backlight>.
Set <Mode> to <HLC>.
Set the <HLC level> and the <Mask
tone>.
HLC level : Adjust the brightness
level so as to remove the incoming
highlight from a specific condition.
Mask tone : Adjust the mask tone of
the highlighted area.
•
•
•
•
M

1.
2.
3.
4.
1.
2.
3.
•
•