English _51
● SETUP SCREEN
To set the Intelligent Video Analysis
Select an Intelligent Video Analysis
mode.
Set whether to use the Intelligent Video
Analysis function.
Specify the event rules.
You can set a total of 3 rules including the
virtual line and the specified area.
Set whether you want to use the
overlay or not.
If you set it to <Enable>, the event
rules will be shown on the screen.
Select a sensitivity level of the camera’s
object detection.
Specify the object size.
Specify whether or not the event area is
displayed.
If you set it to <On>, the suspect
area where the event occurs will be
marked in a red box.
Specify the activation time and
activation condition.
For more information about <Activation
time> and <Action>, refer to “Alarm input”. (page
49)
When done, click [Apply (
)].
Motion Detection and Intelligent Video Analysis cannot be used simultaneously.
If camera is capturing a close object, the video analysis capability may degrade. In the following
cases, the video analysis function may not produce a proper result on the default event and
motion detections.
The object color or brightness is similar to the background.
Multiple movements continue occurring at random due to a scene change or other reasons.
A fixed object continues moving in the same position.
An object hides other objects behind.
1.
2.
3.
4.
-
5.
6.
7.
-
8.
9.
J
-
-
-
-
To Next Page
Loading...
