English _41
● SETUP SCREEN
OSD Setup
Select <OSD>.
Select each item and set it properly.
Camera title : Use alphanumeric
characters in the list and enter a
desired title in the bottom input line.
You can enter up to 15 characters for the
title.
Camera title position x, y : Specify the coordinates where the camera title is
displayed.
IR Mode Setup
Select <IR Mode>.
Select each item and set it properly.
IR Mode : When the IR indicator
turns on in B/W mode, the screen
will be protected from saturation on
the center area so that you can identify a short-distant object.
Off : IR mode will be disabled.
Auto : Adjust the IR brightness according to the brightness of the object on the
center screen.
Manual : Adjust the IR brightness manually.
Level : If you set IR mode to Manual, you can adjust the brightness level of the IR
indicator to between 0 and 32.
1.
2.
•
•
1.
2.
•
-
-
-
•
To Next Page
Loading...
