English _43
● SETUP SCREEN
Port
From the Setup menu, select the
<Network ( )> tab.
Click <Port>.
Type in each item in the Port menu as
necessary.
Neither the port range between 0 and 1023
nor port 3702 is available.
HTTP port : HTTP port used to
access the camera via the web
browser.
The default is 80(TCP).
VNP port : Set a port used to transfer video signals with the Samsung protocols.
RTSP port : Used to transfer videos in the RTSP mode; the default is 554.
Viewer port : Used to transfer videos to the Web Viewer; the default is 4520.
Silverlight policy port : Silverlight is used to permit to acquire a network
connection; the default is 943.
The port range of the Viewer is between 4502 and 4532. If the VNP port is with this effective
range, the Viewer port should be specifi ed the same as the VNP port.
You cannot change the Viewer/Silverlight policy server port of a camera.
When done, click [Apply (
)].
1.
2.
3.
•
•
•
•
•
4.
To Next Page
Loading...
