Samsung SNO-5080R - Page 47

English _47
● SETUP SCREEN
SSL
You can select a secure connection system or install the public certificate for this purpose.
From the Setup menu, select the
<Network (
)> tab.
Click <SSL>.
Select a secure connection system.
To access the camera using HTTPS mode,
you have to type the IP address for the camera
in the form of “https://<Camera_IP>”.
Search for the public certificate that you
want to install on the camera.
To install the certificate on the camera, you need to provide a certificate name (it
can be arbitrarily assigned by the user), certificate file issued from the certification
authority and a key file.
The <HTTPS (Secure connection mode using the public certificate)> item will be active only if
there exists a public certificate installed.
When done, click [Apply (
)].
Installing the certificate
Enter the certificate name.
Select the certificate file to be installed and certificate key, and click [Install ( )]
button.
Deleting the certificate
Click [Delete ( )] button.
1.
2.
3.

4.

5.
1.
2.
1.