English _25
● INSTALLATION & CONNECTION
Installing by surface attachment
M
SNP-6201H cannot be installed on the surface of a wall or ceiling.
Attaching Template & Installing installation base
1. Attach the provided template on the ceiling. Based on the template, drill a 86mm
hole in the ceiling and arrange the wires through the hole.
2. Install installation base as shown.
3. Before installing the exposed bracket, open the hinged door at the bottom of the
bracket as shown in the picture. Hold the knob on the hinged door to open it.
J
In the case of installing the camera at highly humid place, install it on the ceiling after attaching
the enclosed insulation sheet on the back of install base.
Template
<Attaching insulatioin sheet>
Insulation Sheet
To Next Page
Loading...
