English _85
● SETUP SCREEN
PTZ limit
You can specify restrictions on the pan or tilt function.
1. From the Setup menu, select the
<
Video & Audio ( )> tab.
2. Click <
PTZ limit>.
3. Decide if you want to limit the PT
operations. If so, specify the details.
• Mode : Select a mode to set
between Pan limit and Tilt limit.
• Use : Select whether to use limit in
set mode.
• Tilt
Range : The tilt limiting range is
selected.
• Action : PT limiting operation is set.
-[
] : Start limit setting.
-[
] : Provide the start and end points.
-[
] : If you want to change the point setting, click this to return to the
input dialog.
To Next Page
Loading...
