Auto tracking
You can set the system to generate event signals when you activate the auto tracing function.
1. From the Setup menu, select the
<Event ( )> tab.
2. Click <Auto tracking>.
3. Specify the activation time and
activation condition.
`
For more information about
<
Activation
time
>
and
<
Action
>
, refer to “Alarm input”.
(page 123)
4. When done, click [Apply (
)].
App event
You can set the system to generate signals for the events defined on the application. The
event signals provided vary depending on the application function.
1. From the Setup menu, select the
<Event (
)> tab.
2. Click <App event>.
3. Set whether or not to <Enable>.
4. Specify the activation time and
activation condition.
`
For more information about <Activation
time> and <Action>, refer to “Alarm input”.
(page 123)
5. When done, click [Apply (
)].
setup screen
130_ setup screen
To Next Page
Loading...
