English _37
● INSTALLATION & CONNECTION
Removing a SD Memory Card
Gently press down on the exposed end of the memory card
as shown in the diagram to eject the memory card from the
slot.
J
`
Pressing too hard on the SD memory card can cause the card
to shoot out uncontrollably from the slot when released.
`
To turn off the camera or remove the SD memory card, set the
card to <Off> in <Storage> menu and press the [Apply
(
)] button. (page 115)
`
If you turn off the camera or remove the SD memory card that contains data from the product, the
data may be lost or damaged.
MEMORY CARD INFORMATION (NOT INCLUDED)
What is a memory card?
The memory card is an external data storage device that has been developed to offer an
entirely new way to record and share video, audio, and text data using digital devices.
Selecting a memory card that’s suitable for you
Your camera supports SD/Micro SD/SDHC/SDXC memory cards.
You may, however, experience compatibility issues depending on the model and make of
the memory card.
For your camera, we recommend you use a memory card from the following
manufacturers:
SD/Micro SD/SDHC/SDXC Memory Card : Sandisk, Transcend
Memory cards of 4GB ~ 32GB is recommended for using with this camera.
Playback performance can be affected depending on the speed of memory card, so use
the high-speed memory card.
For the framerate below 30 fps, it is recommended to use the specification memory card of
Class 6 or higher.
For the framerate over 31 fps, it is recommended to use the specification memory card of
Class 10 UHS or higher.
Memory Card Use
SD/SDHC/SDXC memory cards feature a switch that disables writing data on to the media.
Having this switch to the Lock position will prevent accidental deletion of data stored in the
memory card but at the same time will also prevent you from writing data on to the media.
To Next Page
Loading...
