setup screen
86_ setup screen
To set a group
The group function enables you to group various presets before calling them in sequence.
Six groups can save a total of 128 presets each.
1. Select <Group> in <Sequence
setup>.
The menu screen will switch to the
group setting screen.
2. Select a group setting mode.
• Group No. : Select a group number.
• Preset No. : Select a preset number.
• Speed : Specify the speed of
movement.
• Dwell time : Specify the duration for
which an operation is kept at the preset position.
3. Press the [
] button.
Entered in the bottom list.
4. If you want to delete a preset added, select it and press the [
] button.
5. Press the [
] button.
Saved in the bottom list.
6. Press the [
] button.
It performs the group operation.
7. Press the [
] button.
The running group will be stop.
8. Press the [
] button.
Selected group data will be deleted.
To Next Page
Loading...
