Why is no JPEG file transferred via e-mail from Samsung SNV-5080 Security Camera?
If your Samsung Security Camera isn't transferring JPEG files via email during an intelligent video analysis event, even when Intelligent Video Analysis is enabled, verify the settings in this order: A. Check the Data & Time settings. B. Ensure Intelligent Video Analysis is set to Enable. C. Alarm Video Transmission must be enabled.
Why does my Samsung SNV-5080 Security Camera viewer disconnect during monitoring?
If the viewer gets disconnected during monitoring with your Samsung Security Camera, it might be due to changes in the camera or network configurations; check all network connections. Also, if the camera is connected over a PPPoE network, poor network conditions could cause disconnections.
What to do if Samsung Security Camera is not detected in the IP installer program?
If your Samsung Security Camera connected to the network isn't detected by the IP installer program, try turning off the firewall settings on your PC and then search for the camera again.
Why Samsung Security Camera cannot record into the SD memory card?
If you cannot record onto the SD memory card with your Samsung Security Camera, first check if the memory card is defective. Also, check if the write protection tab on the memory card is set to “LOCK.”
Why I cannot connect to my Samsung SNV-5080 system using a tab browser of Internet Explorer 7.0?
When you try to connect to the system using a tab browser, the same cookie information is shared, resulting in errors when connected. Therefore, instead of using a tab browser, open a new browser window to connect to the system.
Why no JPEG file is transferred via e-mail on occurrence of intelligent video analysis event of my Samsung SNV-5080?
If no JPEG file is transferred via e-mail when an intelligent video analysis event occurs, verify the settings in the following sequence: A. Check settings. B. The should be set to . C. Alarm Video Transmission must be enabled.
How to fix the issue when I cannot format the SD memory card in my Samsung SNV-5080?
If you cannot format the SD memory card, check if the write protection tab of the memory card is set to “Lock.”
Why does the SD memory indicator not turn on even when the SD memory card is inserted in my Samsung SNV-5080 Security Camera?
If the SD memory indicator does not turn on even when the SD memory card is inserted: * Check if the memory card is defective. * Check if the is checked in ? ? menu.
What to do if the SD memory card is inserted into my Samsung Security Camera, but the camera does not operate properly?
If the SD memory card is inserted but the camera does not operate properly: * Check if the memory card is inserted in the proper direction. * Note that the operation of a memory card formatted by other devices is not guaranteed with this camera unit. * Format the memory card again in the ? ? menu.
How to fix the issue when my Samsung SNV-5080 Security Camera cannot record into the SD memory card?
If you cannot record into the SD memory card: * Check if the memory card is defective. * Verify that the write protection tab of the memory card is not set to “Lock.”
General| Brand | Samsung |
|---|---|
| Model | SNV-5080 |
| Category | Security Camera |
| Language | English |
To Next Page
