Why I cannot connect to my Samsung SNV-5080 system using a tab browser of Internet Explorer 7.0?
When you try to connect to the system using a tab browser, the same cookie information is shared, resulting in errors when connected. Therefore, instead of using a tab browser, open a new browser window to connect to the system.
How to fix Samsung Security Camera when I can't access it from a web browser?
If you're having trouble accessing your Samsung Security Camera from a web browser, first ensure the camera's network settings are correct. Then, verify that all network cables are properly connected. If you're using DHCP, confirm the camera can obtain dynamic IP addresses without issues. For DDNS URL connections, double-check the MAC address entry. Lastly, if your camera connects through a router, ensure port forwarding is correctly configured.
What to do if Samsung Security Camera is not detected in the IP installer program?
If your Samsung Security Camera connected to the network isn't detected by the IP installer program, try turning off the firewall settings on your PC and then search for the camera again.
Why does my Samsung SNV-5080 Security Camera viewer disconnect during monitoring?
If the viewer gets disconnected during monitoring with your Samsung Security Camera, it might be due to changes in the camera or network configurations; check all network connections. Also, if the camera is connected over a PPPoE network, poor network conditions could cause disconnections.
Why is no JPEG file transferred via e-mail from Samsung SNV-5080 Security Camera?
If your Samsung Security Camera isn't transferring JPEG files via email during an intelligent video analysis event, even when Intelligent Video Analysis is enabled, verify the settings in this order: A. Check the Data & Time settings. B. Ensure Intelligent Video Analysis is set to Enable. C. Alarm Video Transmission must be enabled.
Why do images overlap on my Samsung SNV-5080?
If images from your Samsung Security Camera are overlapping, it might be because multiple cameras are set to a single multicast address. Check to ensure that each camera uses a different multicast address.
What to do if Samsung Security Camera does not operate properly with SD memory card?
If your Samsung Security Camera isn't operating properly with an SD memory card inserted, first, check if the memory card is inserted in the correct direction. If it is, and the card was formatted by another device, format the memory card again using the camera's ? ? menu.
General| Brand | Samsung |
|---|---|
| Model | SNV-5080 |
| Category | Security Camera |
| Language | English |
To Next Page
