installation & connection
16_ installation & connection
Installation
1. Using the template provided as an
accessory, drill a hole(diameter 6mm, min
depth of 45mm) for screw installation and
firmly insert the plastic anchor provided as
an accessory.
2. Fit the bottom hole to the anchor hole and
insert and fix the taping screw (M4xL40).
3. Connect and arrange the necessary cables
lest that they should be damaged or twisted
while installing the camera.
4.
Adjust the lens in a desired direction by
referring to the “Adjusting the monitoring
direction for the camera” section. (page 17)
5. Close the dome cover.
To ensure waterproofing, tight up the fixing bolts using the L-wrench and drill bit.
To Next Page
Loading...
