Why does my Samsung IP Camera show no image?
If your Samsung IP Camera displays no image, and the transmission method is set to multicast, verify that the LAN the camera is connected to has a router that supports multicast.
What to do if a SD memory card is inserted but the Samsung IP Camera does not recognize it?
If your Samsung IP Camera doesn't recognize the SD memory card, try these steps: * Make sure the memory card is inserted in the correct direction. * Format the memory card again using the camera's menu: go to ? ? .
What to do if I cannot record into the SD memory card of my Samsung IP Camera?
If you're unable to record to the SD memory card in your Samsung IP Camera, consider the following: * Verify that the memory card isn't defective. * Check if the write protection tab on the memory card is set to “LOCK.” If it is, switch it to the unlocked position.
What to do if Samsung IP Camera connected to the network is not detected in the IP installer program?
If your Samsung IP Camera isn't detected in the IP installer program, try turning off the firewall settings on your PC and then search for the camera again.
Why does my Samsung IP Camera viewer get disconnected during monitoring?
If your Samsung IP Camera viewer disconnects during monitoring, here are some potential reasons: * First, check all network connections to ensure they are stable. * If your camera is connected over a PPPoE network, poor network conditions can cause disconnections.
How to fix Samsung IP Camera when I can’t access it from a web browser?
If you're having trouble accessing your Samsung IP Camera through a web browser, here are a few things to check: * Ensure the camera's network settings are correctly configured. * Verify that all network cables are properly connected. * If using DHCP, confirm the camera obtains dynamic IP addresses without issues. * When using a DDNS URL, double-check that the MAC address is entered accurately. * If the camera connects through a broadband router, make sure port forwarding is set up correctly.
How to connect to Samsung SNV-7080 using a tab browser of Internet Explorer 7.0?
Instead of using a tab browser, open a new browser window to connect to the system.
What to do if Samsung SNV-7080 Security Camera does not recognize SD memory card?
If your Samsung Security Camera does not recognize the inserted SD memory card, check if the memory card is inserted in the proper direction. You can also format the memory card again in the ? ? menu.
General| Model | SNV-7080 |
|---|---|
| Camera Type | Network Camera |
| Image Sensor | 1/2.8" CMOS |
| Focal Length | 2.8 ~ 12mm |
| Digital Zoom | 16x |
| PoE | Yes (IEEE802.3af) |
| Ingress Protection | IP66 |
| Resolution | 1920x1080 (Full HD) |
| Lens Type | Varifocal |
| Day/Night | Yes (ICR) |
| Wide Dynamic Range | DWDR |
| Video Compression | H.264, MJPEG |
| Max Frame Rate | 30fps @ 1920 x 1080 |
| Audio | Two-way audio support |
| Ethernet | 10/100BASE-T |
| Wireless | No |
| Local Storage | SD/SDHC memory slot |
| Operating Temperature | -10°C ~ +50°C (14°F ~ 122°F) |
| Power Supply | DC 12V, PoE (IEEE 802.3af) |
| Dimensions | Ø132mm |
To Next Page