setup screen
4. Select <Area> tab.
You can specify an area on the screen
to include or exclude the area to/from
detection.
You can specify up to 4 areas.
• Detection area : Sets the entire
screen as excluded from detection,
and adds specified area as motion
detection area. Select 4 vertices in
the image with your mouse to specify
the detection area.
• Non detection area : Sets the entire
screen as motion detection area, and
excludes specified area as not to
be detected. Select 4 vertices in the
image with your mouse to specify the
non-detection area.
5. To delete an area, right click on the
screen to open popup context menu
and select Delete, and [OK] button.
6. When done, click [Apply (
)].
126_ setup screen
To Next Page
Loading...
