4. Set the <Mode>.
• Definition focus : This is the factory setting for your camera. Select it for video
recording, focusing on reproducibility.
• Motion focus : Record a moving object clearly. If there are many moving objects,
such as on a road or in a crowded place like a museum, select this option.
J
`
Noise level can increase in a low illumination environment, and sensitivity can go down.
• Reduced noise : Select this when you need a video with low noise in the low
illumination environment.
• Bright video : This makes the dark area in a full video brighter.
J
`
Video contracts effects are reduced.
• Motion focus&Reduced noise : Use this when there are many moving objects,
such as on a road or in a crowded place like a museum, or when you need a
video with low noise in a low illumination environment.
• Motion focus&Bright video : Use it when there are many moving objects, such as
on a road or in a crowded place like a museum, or when you need to make a dark
area in full video brighter.
5. Set the operation time.
Initial setting for each image preset mode
Image preset
Minimum
shutter
Maximum
shutter
AGC SSDR SSNR
Definition focus (Default)
When you change the
profile
Default (1/5) - Default (High) Default (12) Default (12)
Motion focus 1/30 1/12000 Default (High) Default (12) 4
Reduced noise 1/15 - Middle Default (12) Default (12)
Bright video Default (1/5) - Default 18 Default (12)
Motion focus&Reduced
noise
1/30 1/12000 Middle Default (12) 4
Motion focus&Bright video 1/30 1/12000 Default 18 4
English _91
● SETUP SCREEN
To Next Page
Loading...
