setup screen
To Set OSD
1. Select <OSD>.
2. Select each item and set it properly.
• Title overlay : It specifies if the
camera name shall be displayed on
the screen.
• Camera title : It specifies the name
of the camera to be displayed on the
screen.
• Title position X, Y : It specifies the position of the camera name on the screen.
• Time display : Specify the use of time display on the screen.
• Date notation : Specify the date format that will be displayed on the screen.
• Time position X, Y : Specify the position of time display on the screen.
• Weekday overlay : Specify the use of date display date on the screen.
• Size : It specifies the size of the text displayed on the screen.
J
`
Depending on the video output resolution and the OSD size, the OSD location can be automatically
adjusted.
To Set IR
1. Select <IR>.
2. Select each item and set it properly.
• Mode : When the IR indicator turns
on in B/W mode, the screen will be
protected from saturation on the center area so that you can identify a short-
distant object.
- Off : IR mode will be disabled.
- Auto : Adjust the IR brightness according to the brightness of the object on the
center screen.
- Manual : Adjust the IR brightness manually.
• Level : If you set IR mode to Manual, you can adjust the brightness level of the IR
indicator to between 1 and 99.
98_ setup screen
To Next Page
Loading...
