26_ installation & connection
installation & connection
INSTALLATION (SND-7084R)
Precautions before installation
Ensure you read out the following instructions before installing the camera:
• It must be installed on the area (ceiling or wall) that can withstand 5 times the weight
of the camera including the installation bracket.
• Stuck-in or peeled-off cables can cause damage to the product or a fire.
• For safety purposes, keep anyone else away from the installation site.
And put aside personal belongings from the site, just in case.
Disassembling
1. With the provided L-wrench, loosen 2 bolts
on the dome cover counter clockwise to
remove the cover.
2. Lift up the inner cover to separate it.
Dome cover
Bolts
To Next Page
Loading...
