English _73
● SETUP SCREEN
`
To use Intelligent Video Analysis (VA)
1. Select an Intelligent Video Analysis
mode.
2. Set <IV analysis function> to
<Enable>.
3. Specify the event rules.
4. Set whether you want to use the
overlay or not.
- If you set it to <Enable>, the event
rules will be shown on the screen.
5. Select the detection sensitivity of a
moving object.
`
Set to a lower sensitivity in environments that
allow clear distinguishing of objects from
background.
Set to a higher sensitivity otherwise, such as
in a dark place.
6. Specify the object size.
7. Specify whether or not the event area is
displayed.
- If you set it to <On>, the suspect
area where the event occurs will be
marked in a red box.
8. Specify the activation time and
activation condition.
`
For more information about <Activation time> and <Action>, refer to “Alarm input”. (page 71)
9. When done, click [Apply
( )
].
To Next Page
Loading...
