Live Transfer
Sets the quality of the image that is transferred from the DVR to the network.
Using the mouse may help make setup easier.
1. Use the up/down buttons (▲▼) in <Network> window to
move to <Live Transfer>, and press [ENTER] button.
The Live Transfer window appears.
2. Use direction buttons (▲▼_ +) to move to a desired item,
and set the value.
•Resolution: Shows the selected network profile’s resolution
setting.
•Quality: Shows the selected network profile’s image quality
setting.
3. When the live transfer is done, press <OK>.
Live Transfer
OK Cancel
Previous/Next Page
CH Resolution
Quality
1 CIF
Low
2 CIF
Low
3 CIF
Low
4 CIF
Low
5 CIF
Low
6 CIF
Low
7 CIF
Low
8 CIF
Low
To Next Page
Loading...
