English _113
● SEARCH & PLAY
PLAYBACK
Play
You can play data stored in the HDD and backup a desired portion of the data.
1. In the live menu screen, select <Play> menu or click on <
> in the launcher menu or press the [+]
button on your remote control.
2. Using the up/down(▲▼) button, select the search menu.
` If this is the first time you try to play, you will start with the data search window.
For data search, refer to "Search". (Page 109)
3. Select a data item and click <Play> in the Search menu.
The selected data is played and the play launcher appears on the screen.
` If there is an existing data, <Play> will start immediately without performing the search.
•
Playback Information : Displays the date and time of the current data in the top corner.
•
Backup : Click < > to set the current time to the start time of backup; you can specify a backup area
using the mouse (yellow triangle).
Click < > again to set the current time to the end time of the backup and the "Backup Range" window
appears.
-
Type : Supports formats of NVR and SEC.
` You can select whether or not to "Text data included" for SEC format.
-
Device : Select a backup device.
-
Check Capacity : Enables you to check the capacity of the selected storage device.
4. If you want to return to the live screen while playing, click <
> on the launcher menu or press the [@]
button on your remote control.
Scene Mode ►
CH Info
Live Status
Record Status
PoE Status
Layout ►
Audio Off
Freeze
Stop Alarm
Record
Keep full scr ratio
Play
Search
Backup
Menu
Quick Setup ►
Shutdown
Hide Launcher
Logout
To Next Page
Loading...
