DEFAULT SETTING
To reset the system, move to "System Management > Settings > Load Factory Default" and press the
<Initialization> button.
This returns the factory default settings.
M
` When you initialize the system without changing the <Authority Setting>, you must enter the ID and password to log into the
system after it reboots. The ID and password are "admin" and "4321", respectively.
Please change the password after you log in.
` The default settings are based on SRN-1673S.
` The initial administrator ID is "admin" and the password should be set when logging in for the first time.
` Please change your password every three months to safely protect personal information and to prevent the damage of the information theft.
Please, take note that it's a user's responsibility for the security and any other problems caused by mismanaging a password.
Category Details Factory Default
System
Date/Time/Language Date/Time/Language
Date YYYY-MM-DD
Time 24 hours
Time Zone GMT
Time Sync. OFF
DST OFF
Language English
Holiday OFF
User
Admin ID admin
Permission Setup
Restricted Access
Backup/Record/Record
Stop/Search/PTZ/Remote
Alarm Out/Shutdown
Restriction on Network Access
None
Auto Log out 3 Min
Manual Input of ID OFF
System Management System Information Device Name NVR
Log Information
System Log Log List Setup Start (Local)
Event Log Log List Video Loss Detection
Backup Log User admin
Device
Camera
Cam Registration OFF
Camera Setup OFF
Live Setup OFF
Channel Setup
Video ON
Audio OFF
Camera Name CAM 01 ~ CAM 16
Storage Device Device/Format
Device HDD
Usage Internal
Status Normal
Temperature 31°C/86°F
To Next Page
Loading...
