English _37
● LIVE
Shutting Down the System
1. Press the [POWER] button for your remote controller or
select <Shutdown> in the live screen menu.
2. The “Shutdown” confirmation pop-up window will appear.
3. Using the directional button on your remote control, select
<OK> and press the [ENTER] button or click on <OK>.
The system will shut down.
M
` Only the user with the "shutdown" permission can shut down
the system.
` For the permission management, refer to "User > Setting Permissions". (Page 63)
Login
If you want to use the NVR menu, you need to login as a user with the privileges to access it.
1. In the live mode screen, right click the mouse button or
press the [MENU] button on your remote control.
You will see the context menu on the screen as shown.
2. Select <Login>.
The login dialog appears.
J
` Even if you press the menu button that requires a login with the
remote control, the login screen will appear.
` The first administator ID is "admin" and the password must be set
in the Installation Wizard.
` Set password for your wireless network if you use the product with
a wireless router. Being not protected with password or using the
default wireless router password may expose your video data to potential threat.
` Please change your password every three months to safely protect personal information and to prevent the damage of the
information theft.
Please, take note that it’s a user’s responsibility for the security and any other problems caused by mismanaging a password.
M
` To change access privileges, refer to "User > Setting Permissions". (Page 63)
Scene Mode ►
CH Info
Live Status
Audio Off
Freeze
Stop Alarm
Record
Keep full scr ratio
Play
Search
Backup
Menu
Quick Setup ►
Shutdown
Hide Launcher
Login
To Next Page
Loading...
