you press a key on the keyboard. For energy conservation, turn your LCD Display OFF when
it is not needed, or when leaving it unattended for long periods. The PowerSaver system
operates with a VESA DPM compliant video card installed in your computer. Use the software
utility installed on your computer to set up this feature.
PowerSaver
State Normal Opera-
tion
Power saving
mode
Power off Power off
(Power Swich)
Power Indicator On (Green) Blinking Amber Off
Power Con-
sumption
(With Network
Box)
425 Watts
(1449.25 BTU/
h)
5 Watts
(17.05 BTU/h)
5 Watts
(17.05 BTU/h)
0 Watts
(0 BTU/h)
Power Con-
sumption
(Without Net-
work Box)
353 Watts
(1203.73 BTU/
h)
2 Watts
(6.28 BTU/h)
1 Watts
(3.41 BTU/h)
0 Watts
(0 BTU/h)
Note
• The actual power consumption may be different from the indicated power consumption
above if the system conditions or settings are changed.
• To stop any power consumption, turn off the switch or disconnect the power cable on the
back. Be sure to disconnect the power if you intend to stay away from home for many
hours.
• If you connect a network box (sold separately), the LFD will no longer be in compliance
with Energy Star 5.0.
Preset Timing Modes
If the signal transferred from the computer is the same as the following Preset Timing Modes,
the screen will be adjusted automatically. However, if the signal differs, the screen may go
blank while the power LED is on. Refer to the video card manual and adjusts the screen as
follows.
Display Mode Horizontal
Frequency
(kHz)
Vertical Fre-
quency (Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 640 x 350 31.469 70.086 25.175 +/-
IBM, 640 x 480 31.469 59.940 25.175 -/-
IBM, 720 x 400 31.469 70.087 28.322 -/+
MAC, 640 x 480 35.000 66.667 30.240 -/-
MAC, 832 x 624 49.726 74.551 57.284 -/-
MAC, 1152 x 870 68.681 75.062 100.000 -/-
VESA, 640 x 480 37.861 72.809 31.500 -/-
VESA, 640 x 480 37.500 75.000 31.500 -/-
VESA, 800 x 600 35.156 56.250 36.000 +/+
Specifications
To Next Page
Loading...
