21
Preparations
1
1 Preparations
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
Confirm a menu selection.
Pressing the [ ] button when the OSD menu is not displayed will
change the input source (Client/Analog). If you power on the product or
change the input source by pressing the [ ] button, a message
that shows the changed input source will appear at the top left corner of
the screen.
Press the [ ] button to automatically adjust the screen settings.
Available only in Analog mode.
Changing the resolution in Display Properties will activate the
Auto Adjustment function.
Use this button for turning the Display on and off.
Pressing the power button for more than 4 seconds forces the product
to shut down.
The power indicator will be lit when the product is operating
normally.
To reduce power consumption, it is best to remove the power
cable when you will not be using the product for an extended
period of time.
Function Key Guide
Press one of the buttons on the monitor, Function Key Guide will appear
on the screen. (This does not apply to the power button.)
If you press a button on the front of the monitor, an Function Key Guide
will display showing the function of the button before the menu for the
pressed button appears.
To go to the menu, press the button on the front of the monitor again.
Function Key Guide may vary according to functions and models. Please
refer to actual product.
Icons Description
AUTO
To Next Page
Loading...
Need help?
General
