Samsung TC222T - Programs

34
Using "Windows 10 Enterprise LTSB"
2
2 Using "Windows 10 Enterprise LTSB"
2.3.3 Programs
Remote Desktop Connection
You can control a running terminal server or another computer (Windows 95 or later) remotely through a
remote desktop connection.
 Remote Desktop
 Windows 7 Professional or Microsoft Windows Server 2008, 2008R2, 2012, 2012R2 must
be installed on the computer to be controlled remotely. This computer is called a host.
 A remote computer running on an operating system later than Windows 95 is required. This
remote computer is called
a client. The client software for the remote desktop connection must be
installed on the client.
 You must also be connected to the Internet. A broadband Internet connection is good for high
performance. However, because the remote desktop transmits a minimum set of data including
the display data and keyboard data to control the host remotely, a broadband Internet
connection is not required. You can run a remote desktop on a low bandwidth Internet
connection.
When running a remote desktop on Windows 7 Professional, you cannot use the operating
system of your computer.
 Enabling Your Computer as the Host
You must enable the Remote Desktop feature to control it from another computer. You must be
logged on as an Administrator or a member of the Administrators group to enable Remote
Desktop on your computer. Follow these steps:
1 Open the System folder in the Control Panel.
2 Go to [Start Control Panel System and Security System], and click Remote
settings.
3 If you want to block other PCs from accessing your PC using Remote Desktop or
RemoteApp, select “Don't allow remote connections to this computer.”
 To allow a remote PC to access your PC using any version of Remote Desktop or RemoteApp,
select "Allow remote connections to this computer”
 To allow a remote PC to access your PC using a Remote Desktop or RemoteApp version
requiring a network level authentication, select "Allow connections only from computers