47
Connecting and Using a Source Device
3
3 Connecting and Using a Source Device
3.2.6 Setting Optimum Resolution
An information message about setting optimum resolution will appear if you power on the product for the
first time after purchase.
Select a language and change the resolution to the optimum value.
1 Press [ ] to move to the language you want and press [ ].
2 To hide the information message, press [ ].
If the optimum resolution is not selected, the message will appear up to three times for a specified
time even when the product is turned off and on again.
The optimum resolution can also be selected in Control Panel on your PC.
Return
English
The optimal resolution for this
monitor is as follows:
****x**** ** Hz
Use the above settings to set
the resolution on your PC.
Setup Guide
AUTO
AUTO
To Next Page
Loading...
