76
Setup and Reset
7
7 Setup and Reset
7.4 Key Repeat Time
Control the response rate of a button when the button is pressed.
The functions available on the monitor may vary depending on the model. Refer to the actual product.
7.4.1 Configuring Key Repeat Time
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ]
to display the corresponding menu screen.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to Key Repeat Time and press [ ] on the product.
The following screen will appear.
Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds
only once when a button is pressed.
4 Press [ ] to move to the option you want and press [ ].
5 The selected option will be applied.
Off
Acceleration
Auto
Reset All
Smart Eco Saving
Off Timer Plus
Key Repeat Time
AUTO
AUTO
Configure the
response rate of a
button when the
button is pressed.
Acceleration
1 sec
2 sec
No Repeat
To Next Page
Loading...
Need help?
General
