35
Using "Windows 10 Enterprise LTSB"
2
2 Using "Windows 10 Enterprise LTSB"
running Remote Desktop with Network Level Authentication (recommended)" to run Remote
Desktop using network-level authentication.
Start a Remote Desktop Session on the Client
Once you have enabled your host computer to allow remote connections and installed the client
software on a Windowsbased client computer, you are ready to start a Remote Desktop session.
You must first establish a virtual private network connection or remote access service connection
from your client computer to your host computer. To connect to another remote desktop, follow the
instructions below.
1 Go to [Start All Programs Accessories Remote Desktop Connection] or double-
click the Remote Desktop Connection icon to open Remote Desktop Connection.
2 Enter the host computer name. You can configure detailed settings by clicking the Show
Options button.
To Next Page
Loading...
