30
Using "Windows 10 Enterprise LTSB"
2
2 Using "Windows 10 Enterprise LTSB"
The feature is intended to power on the product. (It does not support the function to power off
the product.)
Configuring the settings
1 Press the power button on the product to turn on the power LED. Press F2 to access the BIOS
setup page.
2 Go to AMD Platform and set Wake on LAN option to Disable or Enable.
(Default setting is Enable.)
3 Press F10 to save the change (Save) and select Yes at the prompt to exit from the current
session.
Wake on USB
The feature switches the system to normal operation mode if the system is in standby mode after
being left idle for a specified period of time. The mode will switch if a change to the keyboard or
mouse input is detected.
Changes include clicking a mouse button or pressing a key on the keyboard.
To Next Page
Loading...
