42
Using "Windows 10 Enterprise LTSB"
2
2 Using "Windows 10 Enterprise LTSB"
Using the Standalone restore solution
Restore the system using a restore image saved on the product.
1 After the power is connected, press the Home key immediately after the system starts during
boot to enter the boot menu.
2 Select the Recovery Mode menu and press the P key to enter "admin" which is the password.
3 Run the Recovery Mode menu by pressing the Enter key.
4 If the PROMPT "root@xxxxx:/#" appears, enter "recovery" to restore the system.
5 If PROMPT appears after a message informing that the system is successfully restored, run the
reboot command to restart the system.
Disk is configured as follows. Deleting or changing partitions may disable booting or the Standalone
restore solution.
“Your PC into problem” message appears after restarting the system. But please ignore the
message and restoring will be finished normally after disk checking.
Data saved by the user and customized settings are deleted after a system restore.
BOOT_AGENT
Windows 10 Enterprise
LTSB
BACKUP
Drive Letter is not defined C: Drive Letter is not defined
To Next Page
Loading...
