Disassembly and Reassembly _ 13
Part Figure Description
Top Cover Assembly
/ Door Switch
1. Remove the 4 screws from the cover top.
2. Separate the control panel assembly.
3. Separate the water valve, the pressure
switch.
Separatethehousingtopreventstress
anddamagetothewire-harness.
4. Separate the main wire harness, the
pressure switch hose clip, Grounding screw.
5. Remove the 2 cap screws
6 . Remove the 2 screws from the cover top
7. Separate the top cover assembly by lifting
and pushing ahead the top part of the
assembly.
8. Remove the 2 screws.
To Next Page
Loading...
