Samsung WA40A3005AW/A4 - Page 16

14 _ Disassembly and Reassembly
Part Figure Description
Sensor Pressure Switch
1. Disassemble the control panel assembly.
2. Separate the pressure switch housing.
3. Before separating the hose, release the clip.
Whenreleasingtheclip,takecarethat
youdonottearthehose.
Drain-Pump
1
3
5
2
4
6
 
2. Separate 2 clamps.
 
4. Separate 2 pins.
5. Remove the 13 screws in base.
6. Remove the 3 screws.
7. screws are separated by ‘+’ shape hand driver.