Samsung WA40A3005AW/A4 - Page 18

16 _ Disassembly and Reassembly
Part Figure Description
Clutch
(continued)
6. Remove the shaft with the jig wrench.


direction.
7. Place the main body so that the front
frame faces upward and remove the 2 bolts
holding the saddle with a 10mm wrench.
Whenyouplacethewasherontheoor,
takecarethatyoudonotdamageor
scratchtheproduct.
8. Remove the belt.
Whenyoureplacebelt,checkbelt
tensioncertainly.
9. Remove the NUT with a 17mm wrench and
remove ASSY PULLEY MOTOR.
 