01 Cycle Selector Turn the dial to select a cycle.
02 Display
The display shows current cycle information and estimated time
remaining, or an information code when a problem occurs.
03
Temp.
Press to change the water temperature for the current cycle.
04
Rinse
Press to change the rinse count for the current cycle. You can set the
rinse count to a max of 5, depending on the cycle.
05
Spin
Press to change the spinning speed for the current cycle.
• Rinse Hold (
): The nal rinse process is suspended so that the
laundry remains in the water. To unload the laundry, run a drain
or spin process.
• No Spin : The drum does not spin after the nal drain process.
06
Options
Press to select an option from Intensive and Pre Wash. Press again to
deselect.
07
Smart Control
Press this button to activate/deactivate the Smart Control function.
When the Smart Control function is activated, you can control your
washer using your mobile device. (For detailed information, refer to
the “Samsung Smart Home app” section on page 37.)
08
Delay End
Delay End lets you set the end time of the current cycle. Based
on your settings, the start time of the cycle will be determined
by the machine’s internal logic. For example, this setting is useful
for programming your machine to nish a wash at the time you
normally return home from work.
• Press to choose a preset unit of hours.
09
Quick Wash
15’/30’
For lightly soiled garments of less than 2 kg that you want to wash
quickly.
WW80K7415OW_DC68-03671J_EN.indd 29 2016/2/5 11:59:46
To Next Page
Loading...