Installation and Operation Manual
During navigation, the “MOB” feature
provides a one-touch method of storing a
location, such as point where a crew member
fell overboard. In this mode, the chart plotter
places a MOB point on the chart page and all
the navigation data shown is related to
navigating back to this point, allowing you to
retrace your path to the MOB point
efficiently.
MOB will not work if the
unit does not have a GPS
fix.
1 When you press , a MOB waypoint is
created.
2 When
is pushed not in the Chart
window, the screen automatically is
changed to Chart window and MOB
waypoint is at the center of the chart.
3 If autopilot is connected, the unit sets the
MOB waypoint to be the destination and
start to navigate.
This might result in a
sudden and dangerous turn.
Tip: Even though navigation to MOB
waypoint is canceled, the MOB waypoint is
not be removed from the waypoint list. To
delete the MOB waypoint, you need to delete
it manually.
MOB is saved in Waypoint window of Main
screen. Please refer p39 for how to delete.
To Next Page
Loading...
