Understanding
Safety-Alert
Messages
Several types of safety-alert messages may appear throughout this instruction sheet as well as
on labels and tags attached to the S&C Series 2000 Circuit-Switcher, Model 2040. Familiarize
yourself with these types of messages and the importance of these signal words:
DANGER
“DANGER” identifies the most serious and immediate hazards that will likely result in
serious personal injury or death if instructions, including recommended precautions, are
not followed.
WARNING
“WARNING” identifies hazards or unsafe practices that can result in serious personal
injury or death if instructions, including recommended precautions, are not followed.
CAUTION
“CAUTION” identifies hazards or unsafe practices that can result in minor personal injury
if instructions, including recommended precautions, are not followed.
NOTICE
“NOTICE” identifies important procedures or requirements that can result in product or
property damage if instructions are not followed.
Following
Safety Instructions
If you do not understand any portion of this instruction sheet and need assistance,
contact your nearest S&C Sales Office or S&C Authorized Distributor. Their tele-
phone numbers are listed on S&C’s website sandc.com, or call the S&C Global Monitoring
and Support Center at 1-888-762-1100.
NOTICE
Thoroughly and carefully read this
instruction sheet before installing or
operat ing your S&C Series 2000 Circuit-
Switcher, Model 2040.
Replacement
Instructions and
Labels
If you need additional copies of this instruction sheet, contact your nearest S&C Sales Ofce,
S&C Authorized Distributor, S&C Head quarters, or S&C Electric Canada Ltd.
It is important that any missing, damaged, or faded labels on the equipment be replaced
immediately. Replacement labels are available by contacting your nearest S&C Sales Office,
S&C Authorized Distrib utor, S&C Headquarters, or S&C Electric Canada Ltd.
Safety InformationSafety Information
4 S&C Instruction Sheet 716-502
To Next Page
Loading...
Need help?
General
